Avery Dennison Monarch 9864 Error Messages - Manual (Page 51)

05/08 Rev. AB USER MANUAL Error Messages
9844 – 9854 – 9864
51
5600 Job without #Q
Status The print job misses the declaration of the print amount (Easy Plug
command #Q).
Action Insert a #Q command with the print amount.
5601 Job memory full
Status The memory for Easy Plug printjobs is full.
Action Reduce the reserved memory for one or more of the following memory
areas:
•
Free store size (
SYSTEM PARAMETER > Free store size
)
•
RAM disk size (
SYSTEM PARAMETER > Ram disk size
)
• Font download size (
SYSTEM PARAMETER > Font downl. area
)
If there are printjobs in the printer queue, wait until they are processed.
6000 Param. incorrect
Status Novram check sum error.
Check the setting of the printhead resistance (parameter
SYSTEM PARAMETER > Head resistance ) before you press Online. The value is
invalid.
Action Press Online to confirm. All parameters are reset to the factory defaults.
6001 Nov. prog. err.
Status Error during allocation of main memory.
Action Turn off the printer, wait 30 seconds, then turn it back on. If the error
message continues to appear, contact Service.
6002 New prog. vers.
Status Occurs after a firmware update. Then, the printer reports that new firmware
is available.
Action Press Online to acknowledge. All parameters are reset to the factory
defaults.
6003 Memory error
Status Error during partitioning of the main memory.
Action Turn off the printer, wait 30 seconds, then turn it back on. If the error
message continues to appear, contact Service.