Avery Dennison Monarch 9864 Error Messages - Manual (Page 23)

05/08 Rev. AB USER MANUAL Error Messages
9844 – 9854 – 9864
23
1335 #YV Field cont.
Status Content of the #YV field (variables data field) could not be pasted.
Action Press Online to acknowledge.
Notes about using Easy Plug commands can be found in the Easy Plug
manual.
1336 #YV no. incorr.
Status #YV field (variables data field) with the given number not found.
Action Press Online to acknowledge.
Check the number of the #YV field.
Notes about using Easy Plug commands can be found in the Easy Plug
manual.
1390 Web width zero
Status The printer was set to printing several label rows (Easy Plug command
#ER, n > 1); but the label width was incorrectly set to zero (b = 0).
Action Correct the #ER command regarding the setting of parameter b.
Notes about using Easy Plug commands can be found in the Easy Plug
manual.
1391 Web > Width
Status The printer was set to printing several label rows (Easy Plug command
#ER, n > 1); but one or both of the parameters n and b are set so n * b
(label row width * no. of rows) exceeds the material width.
Action Correct the #ER command regarding the setting of parameters n and b.
Notes about using Easy Plug commands can be found in the Easy Plug
manual.
1392 Job memory full
Status The error can have several causes.
Action See notes in " Unspecific errors " section.
1393 Job struct creat
Status The error can have several causes.
Action See notes in " Unspecific errors " section.
1394 Invalidation
Status General software error
Action Turn off the printer, wait 30 seconds, then turn it back on.
See notes in “General software errors” section.