beautypg.com

5121 touch down, 5122 plc not ready, Touch down – Avery Dennison Monarch 9864 Error Messages User Manual

Page 42: Plc not ready

background image

05/08 Rev. AB

USER MANUAL

Error Messages

9844 – 9854 – 9864

42

5121 Touch

down

Status

The applied applicator does not reach the Touch Down Position. It extends
completely without reaching any product or other resistance.

Preconditions for this error to occur:

The parameter

DP INTERFACE > Interface type

is set to USI Applicator.

Internal inputs are enabled.

Action

Correct the applicator position. The applicator must reach the product

before it is completely extended.

Press Online to acknowledge.

5122

PLC not ready

Status

The connected PLC is not on line.

Preconditions for this error to occur:

The parameter

DP INTERFACE > Interface type

is set to USI Applicator.

Internal inputs are enabled.

Action

Check if the PLC is powered on.

Check if the PLC shows any error status.

Press Online to acknowledge.