Echelon LonScanner FX Protocol Analyzer User Manual
Page 68
62
Network Interfaces
2. Select the network interface that you want to configure in the Device
Selected dropdown list box.
3. For the NI Application dropdown list box:
a. If you are using a PCC-10, select PCC10VNI.
b. If you are using a PCLTA-20 or a PCLTA-21, select PCL10VNI.
4. Click OK to save your changes and close the dialog. You can now use
your PCC-10, PCLTA-20 or PCLTA-21 with the protocol analyzer.
See one of the following manuals for additional information:
•
LonWorks PCC-10 PC Card User's Guide
(078-0155-01B)
•
LonWorks PCLTA-20 PCI LonTalk Adapter User's Guide
(078-0179-01C)
•
LonWorks PCLTA-21 PCI Interface User's Guide
(078-0271-01A)