Echelon LonScanner FX Protocol Analyzer - Manual (Page 44)

38 Logging Data
Figure 28. New Device Data Dialog
3. Enter the device’s name in the Device Name field, and then fill in the rest of
the fields in the New Device Data dialog. See the online help for information
about these fields.
4. Click OK to close the New Device Data dialog and return to the Select Device
dialog. The new device name is listed in the Devices list. You can edit the
device name by selecting it and clicking Edit. You can delete the device name
by selecting it and clicking Delete.
5. Click OK to close the dialog.
Creating Message Code Names
You can create or change an ISO/IEC 14908-1 message code name, and you can
optionally specify formatting for a message. To create message code names,
perform the following steps:
1. Select Names → Edit Message Codes to open the Edit Message Codes dialog,
as shown in Figure 29 on page 39.