Echelon LonScanner FX Protocol Analyzer - Manual (Page 24)

18 Logging Data
You can also filter packets with a custom filter file. To create and use a custom
filter file, modify the LsCustomFilter.cpp file in the LonScanner Example
Custom Filter directory.
Configuring the Global and Device Filters
To configure either the device filter or the global filter, perform the following
steps:
1. Select Filter → Edit Filters to open the Device Filter dialog, as shown in
Figure 10.
Figure 10. Device Filter Dialog
2. To include all devices in the filter, skip to step 5. To filter packets
addressed to or from a specific device, click New. The Select Device to
Add dialog opens, which lists all of the devices that are defined in the
current names file. Select a device to add to the filter, and click Add. For
more information on names files, see Using Names on page 29.
After you select a device to filter, you return to the Device Filter dialog
and the newly added device is listed in the Device list.
3. If you added a device to the filter in the previous step, all packets
addressed to or from the device pass the device filter by default. You can
refine the filter by specifying which packets pass the device filter: all
packets or network variable packets addressed to the device, or all
packets or network variable packets sent by the device.
To refine the filter, edit the filter configuration for the device by selecting