Echelon Lumewave CRD 3000 Street Light Bridge - Manual (Page 67)

Street Light Bridge Integrator’s Guide 57
Last Time
Reached
The time at which the device last responded to a network
message.
Frequency in use The frequency carrier of the signal at the hop (Primary or
Secondary). For more information on the use of these
frequency carriers on a L ON W ORKS power line channel, see the
LonWorks PLT-22 Power Line Transceiver User’s Guide (110kHz
- 140kHz Operation).
For RF hops, Primary or Secondary refer to the CRD 3000
Street Light Bridge module’s primary or secondary channel lists.
Signal Strength Direct Communication Devices: The reduction in signal
strength measured at the device in decibels (dB).
Proxies and Target Devices: The reduction in signal strength
at the hop in decibels (dB). This value is the minimum of the
signal strengths measured at the device and its proxy.
Signal Margin Direct Communication Devices: The amount in decibels (dB)
that the signal margin exceeds the recommended amount
calculated by the SmartServer for reliable communications at
the device.
Proxies and Target Devices: The amount in decibels (dB)
that the signal margin exceeds the recommended amount
calculated by the SmartServer for reliable communications at
the hop.