Echelon Lumewave CRD 3000 Street Light Bridge - Manual (Page 115)

Street Light Bridge Integrator’s Guide 105
Table 3. Input Data Points
Variable Description Ok to Modify?
nviL5Timeout Defines a timeout for updating the
system firmware. Such updates
should only be performed with
guidance from Echelon Support.
No
Changing this value can prevent
communications with the device.
nciLtRate
Define characteristics for the
algorithms that control channel
and signal quality.
No
Changing these values can prevent
successful communications.
nciHbRate
nciUpDwell
nciDownDwell
nciRcvStable
nciCqaLimit
nciSlotCount
nciSlotWidth
nciTransmitHb
nciSqiThreshold
nciSqiMin
nciSqiWeight
nciIdle
nciSqiCycles
nciSqiRestart
nciRevival
nciPriChs Defines channels for RF data
transmission on the primary
(normal) LonTalk (ISO/IEC 14908-
3) path.
Valid values are 11 to 26. Values
outside this range are ignored.
Yes
See Defining the Networking
Channels on page 36 for
information about defining
channels.
Use 0 (zero) to indicate an unused
channel.