Echelon Lumewave CRD 3000 Street Light Bridge User Manual
Page 105

Street Light Bridge Integrator’s Guide
95
You can select a Day Based or a Month Based pattern.
Select a Day Based pattern to specify that the event should occur
every first (to 31
st
) day (or Sunday, Monday, and so on) of the month,
or every weekday (or weekend day, Sunday, Monday, and so on) of the
month, or every second (or third to sixth) day of the month.
Select a Month Based pattern to specify that the event should occur
every other month, quarterly (every third month), every fourth
month, and so on to every eleventh month, or every January, every
February, and so on to every December.
4. After you select the Recurrence pattern for the event, specify a start
time and end time for the event. You can add additional rows to the
dialog to specify additional start and stop times.
In the Time field for each row, enter the exact time that the event is to
occur (if it is different than the default time). For example, to create an
event that occurs at 7:15 A.M., enter 07:15. You can create up to one
event per minute.
You can also click the clock icon next to the Time field to specify a time
relative to sunrise ( ) or sunset ( ).
Example: To specify an hour before sunrise, enter -01:00 in the field
next to the sunrise icon. To specify an hour after sunset, specify +01:00
in the field next to the sunset icon.
5. In the Preset field for each row, specify the preset value for the event.
For example, select ON or OFF. At the time specified for the row, the
event will set the device to the selected preset value.
6. You can specify a priority for the event in the Priority field. The highest
priority is 255.