Echelon Lumewave CRD 3000 Street Light Bridge - Manual (Page 22)

12 Installation for the Street Lighting Solution
Safety Warning
!
Safety Warning
Fuse F1 in the Street Light Bridge uses a Littleman rated, 300 VAC, 10 A, SLO-
BLO.
This device has no user-serviceable parts.
Only qualified personnel should perform the procedures in this guide.
!
Sicherheitshinweis
Sicherung F1 im Street Light Bridge ist ein Littleman Sicherung bewertet 300
VAC, 10 A, SLO-BLO.
Dieses Gerät hat keine vom Anwender zu wartenden Teile.
Nur qualifiziertes Personal sollte die in diesem Handbuch beschriebenen
Verfahren durchführen.
New Installations
Figure 3 on page 13 shows an overview of the basic process for installing
intelligent street lights with Echelon’s Street Light Bridge technology. The
process includes the following basic steps:
1. Install a Segment Controller
2. Install luminaires
3. Install CRD 3000 Street Light Bridge modules, as needed
Alternatively, you can install the luminaires, and then install the Segment
Controller. However, this document does not describe details for this alternate
installation scenario.