Echelon Lumewave CRD 3000 Street Light Bridge - Manual (Page 37)

Street Light Bridge Integrator’s Guide 27
typically within the Segment Controller /lonworks/Import or
/lonworks/types folders.
Deploying a “Golden Master” Segment Controller
After you set up a Segment Controller with a configuration that is appropriate for
your installation, you can make a template of that configuration, and then deploy
that template on multiple Segment Controllers. See chapter 2 of the Echelon
Enterprise Services 2.0 User’s Guide for information about how to use the Echelon
Enterprise Services to create and deploy an i.LON template.
A golden master template should include the resource files for the CRD 3000
Street Light Bridge module and any luminaire types that the installed network
would likely contain.
Automatically Discovering Devices
If you want the Segment Controller to automatically discover and commission
luminaires and CRD 3000 Street Light Bridge modules within the network, you
can place the Segment Controller in Acquisition Mode. To enable this mode,
perform the following steps:
1. Open the Segment Controller Web pages, as described in Chapter 3 of the
i.LON SmartServer User’s Guide.
2. Click the Tools icon to open the Tools dialog.
3. From the Tools dialog, click Street Light Bridge Installation to open
the Street Light Bridge Installation page.