Juniper Systems Archer Reference Guide User Manual

Page 99

Touchscreen. To clean the touchscreen, follow these steps:
1. Press the power button briefl y to suspend the device.

2. If you applied a protector to the touchscreen, carefully

remove it.

3. Apply water or a mild cleaning solution such as

Windex

409

to a microfi ber cloth and gently wipe off the

touchscreen. Other approved cleaners include

Citrus

Wonder

and

Citrus All Purpose Cleaner

CAUTION: Do not use tissues, paper towels, or harsh
cleaning agents to clean the touchscreen.

4. If you used a cleaning solution, rinse the touchscreen

with water and dry it with a microfi ber cloth.

5. Press the power button to resume the device.

CAUTION: Long exposure to the following solutions may
damage your device:

• pine

oil

•

oil based paint

•

automotive brake cleaner

• isopropyl

alcohol

• carburetor

cleaner

In case the device is exposed to one of these solutions, wipe

it off with a mild cleaning solution.

Case o vermolding. Clean the rubber-like overmolding that
surrounds the case with a cloth and a mild cleaning solution

409

Citrus Wonder

. After you are done cleaning, rinse

the device with water.

Communications module (area housing the USB port, DC
jack, serial port). To clean the communications module, run it
under a faucet. Use a soft toothbrush or toothpick to clean out

any remaining dirt.

Speaker and microphone. If debris gets in the speaker or
microphone, use a soft bristle brush to remove it. Do not