Juniper Systems Archer Reference Guide - Manual (Page 81)

74
This chapter describes the Bluetooth ® profi les recognized
by the Microsoft drivers installed on your Field PC. Drivers
determine which devices your Field PC can communicate
with. If you are using an external Bluetooth CF or SDIO
card and you installed a new driver specifi c to this card
(recommended), consult the documentation that came with
the driver for instructions about its profi les.
Note: Bluetooth cards are not recognized by modules with
integrated Bluetooth. For general instructions about using an
integrated Bluetooth module, see Chapter 8.
This chapter is organized by Bluetooth profi le, each of which
is briefl y described below. Instructions for using each profi le
to create Bluetooth partnerships follow.
• Serial Port Profi le (SPP). Similar to a serial cable, this profi le
acts as a liaison between two devices, such as the Field
PC and a GPS receiver, using virtual ports. (These ports
are described in the previous chapter.)
• Dial-Up Networking (DUN). Lets you connect to a
computer through a cell phone or a Bluetooth-enabled
modem.
• Human Interface Device (HID). Allows you to
communicate between the Field PC and a Bluetooth
keyboard or mouse.
• Object Push Profi le (OPP). This profi le lets you exchange
fi les like data, audio, business cards, appointments, and
contacts. Similar to the well-known object exchange
profi le (OBEX).
Chapter 9
Supported
Bluetooth
®
Profi les