Juniper Systems Archer Reference Guide - Manual (Page 46)

39
Chapter 5: Performing Common Tasks on the Field PC
charge LED disappears. However, the device continues to
charge.
Powering off the Field PC
Powering off the device ends all programs and removes
power from all system components except for the real-time
clock. Powering off your device saves power without draining
the battery.
We recommend powering off the mobile device if it will be
inactive for more than one week.
To power off the Field PC, follow these steps:
1. Save and close all applications. (For instructions on
backing up your fi les, see the section in this chapter
called Backing up data.)
2. Press the Power button until the
Power Button
menu appears, as shown here.
3. Tap Power Off , then OK .
Note: The keyboard backlight stays on
for a few seconds after the device shuts
off . Until the keyboard backlight turns
off , the device cannot be powered on
again.
To power on the device, hold the power button until the
green notifi cation LED appears. The device is now booting.
This process takes about a minute.