Juniper Systems Archer Reference Guide User Manual
Page 87
80
deselected.
4. Open the Devices tab and choose New Partnership.
5. When the cordless modem device is found, tap on it.
6. Enter the passkey.
7. In the Partnership Settings screen, make sure Serial Port
is not selected and that Dialup Networking is selected.
8. Tap
Save.
9. Tap once on the device name to select it.
10. Tap Start > Settings > Connections tab > Connections.
11. Choose Add a new modem connection.
12. Enter a name.
13. Select Bluetooth as the modem.
14. Tap Next.
15. Select the name of the modem and tap Next.
16. Enter your ISP number as provided by your ISP provider
and tap Next.
17. Type in a user name and password.
18. Choose Advanced.
19. Change the baud rate to 115200.
20. Fill in the remaining boxes as appropriate. Click OK when
you’re done.
21. Tap Finish.
Now that you have established a dial-up network connection,
you can check email or look at a webpage using one of two
methods. The fi rst method is to let an application do the
work. (This option is especially useful with cell phones.) The
second method is to do the work yourself. Instructions for
each method follow.
Method 1: Use an Internet browser or application
1. Open Internet Explorer
®
.
2. Fill in the network login boxes.
Method 2: Do it yourself
1. From the Today screen, tap
Start
>
Settings
>
Connections