Juniper Systems Archer Reference Guide User Manual

Page 25

Powering off the Field PC. Powering off the device ends all
programs and removes power from all system components

except for the real-time clock. Unlike suspend mode, the

device resets when it is powered on again.

To preserve battery power, we recommend you power off the

device if it will be left unused for two weeks or longer.

To power off the Field PC,

1. Save your open fi les and close any running programs.

(For instructions on backing up fi les, see Backing up data
in Chapter 5.)

2. Press the Power button until the Power Button menu

appears, as shown here.

Note: The device cannot be powered off while it is plugged
into the wall charger.

3. Tap

Power Off . A warning dialog appears, as shown in the

second picture. Tap OK.

Note: The keyboard backlight
stays on for a few seconds after
the device shuts off . The device
cannot be powered back on until
the keyboard backlight turns off .

To power on your Field PC, hold down the Power button until

you see the green notifi cation light appear.

Resetting the device.

Some programs require you to reset

your device during the installation process. Follow the steps

below to reset the Field PC:

1. Save your open fi les and close any running programs.

(For instructions on backing up fi les, see Backing up data
in Chapter 5.)

2. Press the Power button until the Power Button

appears.

3. Choose

Reset.

th P

b tt

ttil