Juniper Systems Archer Reference Guide - Manual (Page 16)

Step 2: Charge the
battery pack
1. Mount the plug onto the wall charger (if it is not already
assembled).
2. Plug the wall charger into an outlet.
3. Plug the other end of the wall charger
into the DC jack on the Field PC. The
device turns on after a few seconds,
and a fl ashing red light signals the
device is charging.
4. Charging the Field PC for 4.5 hours
charges it up to 95%. Let the device
charge for 6 hours to get a full charge. Note: If the Field
PC suspends and the fl ashing red LED turns off , the device
keeps charging.
Charging temperatures
Only charge your battery pack in temperatures between 32°F
and 104°F (0°C and 40°C). For best results, charge the battery
pack at room temperature (68°F or 20°C).
Step 3: Establish basic
settings on the device
Using the stylus, follow the instructions on the screen to
calibrate the device and establish basic settings.
We recommend creating a name for the Field PC so
external devices like desktop computers or devices that use
Bluetooth ® technology can diff erentiate the Field PC from
other devices more easily.
Chapter 2: Getting Started
9