Juniper Systems Archer Reference Guide - Manual (Page 31)

24
11. With the door latch in the unlock
position, press on the battery door just
below the door latch and slide the latch to
the left to lock it.
12. Reattach the hand strap.
Note: If you remove the battery pack from your
device and the device is still attached to the wall
charger, the battery icon still appears on the
display. When the battery is replaced, charging
resumes.
For instructions on installing or charging a battery pack, see
Chapter 2: Getting Started. For instructions on maintaining
and caring for your battery pack, see Chapter 8: Caring for
your Field PC.
Using peripheral devices
such as CF cards, SD
cards, and USB fl ash drives
The Field PC accepts several peripheral devices. The USB
Host (mini A) accepts devices like USB fl ash drives and
keyboards; the Compact Flash (CF) and Secure Digital (SD)
card slots accept memory cards and IO (Input/Output) cards
such as GPS, modem, and Bluetooth cards.
Note: If your Field PC has integrated Bluetooth ® technology, see
Chapters 8-9 for more details about using peripheral devices
with the Field PC. If you are using an extended cap for larger
peripheral devices, see the extended cap installation instructions
at the end of this guide.
This section explains how to:
• Install and operate USB accessories on the Field PC