Juniper Systems Archer Reference Guide - Manual (Page 88)

Chapter 9: Supported Bluetooth Profi les
81
tab > Connections .
2. Choose Manage existing connections .
3. Tap and hold on a connection and choose Connect from
the menu that appears.
Human Interface Device
(HID) Profi le
This profi le allows you to connect with Human Interface
Devices like Bluetooth keyboards and mice. To make a
connection, follow these steps:
1. Make sure Bluetooth is on or discoverable. Create a
Bluetooth partnership with the device. (See the previous
chapter for instructions on how to do these tasks.)
2. Make sure the HID is ready for pairing and select New
Partnership to search for a Bluetooth device.
3. Select the name of the HID and tap Next.
4. If the device has an assigned passkey or accepts a
passkey you give it, enter the passkey on the Field PC
and tap Next. If the device needs no passkey, leave the
Passkey fi eld blank, tap Next, and choose No when you
are asked whether you want the device to be added to
the device list.
Note: Saying No when you are asked whether you want to
add the device to the device list allows you to proceed to the
next screen; saying
Yes returns you to the passkey screen.
5. If appropriate, enter the same passkey on the HID to
establish a partnership.
6. Select Input Device.
7. Tap Finish. You now have a partnership with the HID.
Note: If no partnership appears for the HID on the Devices
tab screen, try resetting your Field PC.