Juniper Systems Archer Reference Guide - Manual (Page 83)

76
8. Important: Deselect (clear) the Secure Connection
checkbox. Deselecting this option ensures that the
device disconnects the Bluetooth connection only when
you tell it to.
9. Tap Finish to save the settings. Tap OK and Done to close
the Wireless Manager application.
Confi guring ActiveSync on a Bluetooth-enabled desktop
computer to synchronize through the Serial Port Profi le
1. Make sure ActiveSync is set up properly on your desktop
computer.
2. Make sure there are no current ActiveSync connections
on your desktop. Note: If another device is already
connected to the desktop, serial ports do not appear
available. To fi x this, unplug the connected device, then tap
Refresh on the Field PC.
3. On the Today screen of the Field PC, tap on the Wireless
Manager icon and make sure Bluetooth is on or
discoverable.
4. Within Wireless Manager, select Menu then tap Bluetooth
Settings.
5. Select the Devices tab.
6. Tap New Partnership.
7. Tap on the name of the desktop computer, then tap Next.
8. Enter a passkey on the Field PC.
9. Enter the same passkey on your desktop computer.
10. Select ActiveSync on the Field PC. If no ActiveSync option
appears in the list of available services on the Field PC,
check the ActiveSync confi guration on your desktop.
11. Tap Finish to save the settings. Tap OK > Done to close the
Wireless Manager application.
12. On the Field PC, tap Start > Programs > ActiveSync.
Choose Connect via Bluetooth.
Connecting to a desktop computer using a Bluetooth