Juniper Systems Archer Reference Guide - Manual (Page 86)

Chapter 9: Supported Bluetooth Profi les
79
5. In the Devices tab, choose New Partnership.
6. Select your cell phone from the list of devices and tap
Next.
7. Enter any passkey on the Field PC.
8. Enter the same passkey and any other requested
information on your cell phone.
9. On the Field PC, select Dialup Networking, then tap Next.
10. Tap Start > Settings > Connections tab > Connections.
11. Choose Add a new modem connection.
12. Enter a name for the connection and select Bluetooth as
the modem.
13. Tap Next.
14. Select the name of your cell phone, then tap Next.
15. Enter the phone access number according to your phone
carrier’s specifi cations. Tap Next.
16. Enter a user name, password, and domain as specifi ed by
your network administrator.
17. Tap Advanced.
18. Fill in the remaining boxes as appropriate. Tap OK when
you are done.
19. Tap Finish. Now you should be able to connect to the
Internet on the Field PC through your phone’s dialup
connection.
Connecting to the Internet using a cordless modem
To connect to the Internet using a cordless modem, follow
the steps below:
1. Tap on the Bluetooth icon on the Today screen to open
Wireless Manager. Make sure Bluetooth is on. (See the
previous chapter for details.)
2. Tap Menu > Bluetooth Settings.
3. In the Mode tab, make sure Turn on Bluetooth is selected
and that Make the device discoverable to other devices is