FingerTec Ingress - Manual (Page 73)

73
Learn about it in the table below.
Round the work time to the nearest (minutes)
Round Up Work hour is rounded up to the nearest minute and is set to 15, hence all minutes will
be rounded up as per below:
1-15 minutes = 15
16-30 minutes = 30
31-45 minutes = 45
46-59 minutes = 1 hour
Round Down Work hour is rounded down to the nearest minute and is set to 15, all minutes will be
rounded down as per below:
1-15 minutes = 0
16-30 minutes = 15
31-45 minutes = 30
46-59 minutes = 45
Round Midpoint Once you insert a value here, the software will calculate the value’s midpoint. For
example if you set the value at 15 min, the midpoint would be at 7 min. The clocking
schedule’s IN time is 9.00am and the midpoint is 7 min.
If the user verifies in less than 7 minutes after the IN time, for example 9.07 a.m., the
software will round down the transaction data to be displayed as 9.00am. If the user
verifi es more than 7 minutes after the IN time, the software will round up the transac-
tion data to be displayed as 9.15 a.m.
Round up or round down the OT time to the nearest (minutes)
Round Up OT is rounded up to the nearest minute and is set to 15, all minutes will be rounded
up as per below:
1-15 minutes = 15
16-30 minutes = 30
31-45 minutes = 45
46-59 minutes = 1 hour
Round Down OT is round down to the nearest minute and is set to 15, all minutes will be rounded
down as per below:
1-15 minutes = 0
16-30 minutes = 15
31-45 minutes = 30
46-59 minutes = 45
Round Midpoint Once you insert a value here, the software will calculate the value’s midpoint. For
example if you set the value at 30 min, the midpoint would be 15 min. The clocking
schedule’s OT time is 6.00pm and the midpoint is 15 min.
If the user verifies in less than 15 minutes after the OT time, for example 6.15pm,
the software will round down the transaction data to be displayed as 6.00pm. If the
user verifies more than 15 minutes after the IN time, the software will round up the
transaction data to be displayed as 6.30pm.