FingerTec Ingress - Manual (Page 37)

37
1. Click Download Users at the
Menu bar.
2. Double-click to select the de-
vice from the left panel.
3. Check the checkbox to select
users data to download.
Username + Password + Privi-
lege (compulsory item. Ingress
ignores username and password
if the user does not enroll any of
them)
Fingerprint (only select if you
want to download users’ finger-
print templates)
Face (only select if you want to
download users’ face templates)
Card (only select if you want to download users’ card ID)
4. Check “Do not overwrite PC user info if no terminal data is downloaded” to avoid ac-
cidentally downloading data from a device without any data. Ingress will delete all users’
data in its list if the connected terminal is empty. Ignore this if you do not have any data
stored in Ingress.
5. Select the users to download from the right panel.
6. Click Download to proceed.
To download users via USB flash disk
You can use USB flash disk to download users from all terminals and the Keylock series. How-
ever, the Ingressus controller does not have a USB port for data transfer.
1. Click Read User From USB .
2. Click to select USB drive
plugged with the USB flash
disk.
3. Click From USB .
4. Select users by checking the
user ID.
5. Click Download to copy us-
ers’ data into Ingressus.