FingerTec Ingress - Manual (Page 35)

35
10. Press Edit to start to configure.
11. Double click at the No. of User Select to be presented for verification in this group.
12. Press Add Door to select the Ingressus controller to follow this rule.
13. Press Save to save settings.
14. Sync to the Ingressus controller.
To Delete Zone/Device/User Group/Multi card combi-
nation group
If any of the above is not applicable in your environment, or if you wrongly added configura-
tions into the list, you can choose to delete them from the list as follows:
1. Select the required zone/device/user group/multi card combination group from the left
panel to be deleted.
2. Click the button at the top menu bar (Remove Zone, Delete Device, Remove User Group
or Remove multi card combination group) .
3. Click Yes to confirm delete.
Alternatively:
1. Select the item to delete.
2. Right-click on the item to select
Delete .
3. Click Yes to confirm delete.