FingerTec Ingress - Manual (Page 15)

15
Ingress Startup
Once the installation has completed, the
Ingress icon will be available at the desk-
top. Right click the icon and select
Run as
administrator.
The Ingress client will validate the data-
base connection from the server. Once
the validation has been obtained, insert
the Server IP Address and Server Port to
establish connection. Click
Test to test
the connection. When the connection
has been established successfully, click
Save to save the Server IP Address and
Server Port into the computer for future
references.
Now you will reach the Ingress Login Win-
dow. Insert the User Name and Password
to log into Ingress. Default User Name:
admin , Password: 123. You can change
the User Name and Password under In-
gress User Accounts. Click
Login to log
into Ingress. If you wish to reconfigure
the server settings, click
Server Setting .
You can also log into Ingress by using
your fingerprint instead of the username
login. You will need to enroll your finger-
print template(s) under
User Account be-
fore you can login using this method.
Congratulations! Now you are about to experience INGRESS, the Advanced Access Control
Software, brought to you by FingerTec Worldwide.