FingerTec TA300 User Manual

Quick start guide

15-01-01 THU

TCMS

Quick Start Guide

TA300

The Quick Start Guide is intended to provide the user with simple instructions on how
to setup the terminal date/time and communication as well as to perform card enroll-
ment and verification. For more details on other topics of terminal management, refer
to the terminal’s hardware user manual available in the package or online at

• http://info.fingertec.com/timeline100-4

Setting the Date and Time



Select

Timeset

, insert the correct value and press

to save the

settings.

Enrolling Card Users



Connect the USB cable to the computer and power up the TA300.



Press the

Enroll FP

button and press

to start enrolling user.



Enter your

User ID

and press



Follow the instructions on screen, scan your fingerprint 3 times.



Press

to save the enrollment and then press

ESC

to exit to the

main screen.



Place your fingerprint on the scanner to test the verification, and repeat

enrollment process, if necessary.

Activating the Terminal on the TCMS V2 Software



Double click the TCMS V2 software icon.



Click on

Devices

and double click

Setup FingerTec Terminals



Click

Add

and enter your TCMS V2 Product Key - Refer to the reverse

side of the DVD.



Select the terminal under

Model



Insert the

Device ID

and IP

Address

into the columns.



Uncheck the

Disabled

checkbox column.



Wait for the software to link to the terminal.



Enter your Activation Key and click