FingerTec Ingress - Manual (Page 48)

48
1. Click Access Group from the left panel.
2. Click Add Access Group .
3. Name the access group, e.g.: Executive level.
4. Click Edit at the Access Control tab .
5. Click Add to add the device to use this access level.
6. Select Time Set to follow (the time set must be
preset prior to this step).
7. Check Holiday if you want to apply Holiday
Time Zone (refer to Chapter 5 • Access Level by
Holiday for more details).
8. Click OK to save settings.
9. Click Transfer to Device to synchronize settings
to device.
10. Click Edit at the User tab .
11. Click Add to include the users that will follow
this access group and time set.
12. Click OK to save settings.
13. Click Transfer to Device to synchronize users to the device that will follow this access
group.
Access Levels by Holiday
You can control access of users during holiday, e.g.: users can only access company main
entrance from 9am to 12pm during holiday. Set the holiday time set to define the access time
applicable to holidays in Ingress. Ingress does not allow you to proceed if there is no holiday
time set defined. Define the start and end date for holidays under Holiday Settings. Assign
the holiday time set to the specific holiday to take effect.
Setup of Holiday Time Set