FingerTec Ingress - Manual (Page 50)

50
Access Level by Verify Type
You can increase the security level of access by applying different verification types (com-
bination of verification) at different time. With this setting, users must perform several veri-
fications during specific time range at the device to gain access.
1. Click Verify Type from left panel.
2. Click Add Verify Type .
3. Name the Verify Type , for example FP + Password.
4. Select Name (You can select from Time Range 1 to Time Range 50).
5. Define the start and end time applicable for this verification method.
6. Select Verify Type .
7. Click Add .
8. Repeat steps above if you want to add new verification types into the group.
9. Click
Save to save settings.
10. Click Transfer to Device to synchronize settings to terminals.
11. Click Door tab.
12. Click Add to select doors applicable for this verification method.
13. Click Save to save settings.
14. Click Transfer to Device to synchronize settings to device.