FingerTec Ingress - Manual (Page 41)

41
1. Click Browse to find and open the file.
2. Select to Match the column of import data with Ingress.
3. Click Populate User to see the data.
4. Click Read to start to import.
Upload users to devices
You can upload the users’ information to devices without re-enrollment of the users. You can
upload via TCP/IP, RS485 or USB flash disk.
Upload users via TCP/IP or RS485
1. Click Upload User.
2. Select the devices in the left panel to upload the users’ information to.
3.
Check the checkbox to select users information to upload.
Username + Password + Privilege (compulsory item. Ingress ignores username and password if the user
does not enroll any of them)
Fingerprint (only select if you want to download users’ fingerprint templates)
Face (only select if you want to download users’ face templates)
Card (only select if you want to download users’ card ID)
4. Check “Do not overwrite terminal data if no PC user info is downloaded” to avoid acci-
dentally uploading empty data to a device. Ingress will delete all users’ information in the
terminal if you forget to include the information mentioned in step 3. Ignore this if you are
sure the device is new and data is stored in it.
5. Select the users to be uploaded from the right panel.
6. Click Upload to proceed.