FingerTec Ingress - Manual (Page 22)

22
Types of device
Standalone devices
Ingressus I
Ingressus II
Keylock
Quantities of devices/slaves
2 devices
2 slave terminals
4 slave terminals
1
Quantities of door
1
1
2
1
To disable a device:
1. Click to select the device from list.
2. Click
Disable Device .
3. Click Yes to confirm to suspend the device.
Doors
Adding devices into Ingress is to prepare the list of devices installed in the environment.
Now you can start to pair the devices to doors accordingly. You must assign devices to guard
every door. Pairing multiple devices to a specific door allows you to update the same access
settings (e.g.: door unlocks time) to both entry and exit devices.
For installations with Ingressus II (2-doors door controller), you can pair devices with 2 doors.
You can configure different access settings for each door even though they are connected to
the same Ingressus II controller.
Ingress can work with video surveillance software. You can connect to Milestone server or
EpiCamera to stream video from your IP camera for live view or playback. It is recommended
to pair the IP camera with the door/entrance installed with device to monitor users’ move-
ment. In case of abnormal door activities (e.g.: door force open, device dismantled illegally)
Ingress will trigger alarms to alert administrators. You can playback the video at that moment
to know what is going on at the door, or even export the photo or video easily for further
investigation.
Add Standalone Device to Door
1. Click Door at the left panel.
2. Click Add Door .
3. Rename the door, for
example Main entrance.
4. Add description to the
door for easy reference.