Leica Geosystems TPS1100 Professional Series - User Manual - Manual (Page 84)

84 System functions TPS1100 - User Manual 2.2.1en
6
0
2
21
26
RCS communication parameters
The setting for the interface
parameters is valid for
communication in remote-control
mode. The baud rate can be selected
within the range 2400 - 19200. No
other values can be altered.
For detailed information, please refer
to the separate instructions for use. With on-line operation (GeoCOM),
the instrument is switched to a mode
which permits communication with, or
control by, a data recorder or PC.
This mode operates across the
RS232 interface; the GeoCOM
command set is used.
On-line mode
Calls the settings for the
GeoCOM communications
parameters.
Activates the "On-line mode".
The operation of the
instrument is now totally controlled
across the interface. For information
about data structures, and for the
detailed structure of the control
commands, please refer to the
"GeoCOM Reference Manual"(G-
560-0en), which is available only in
English. The on-line mode can be
quitted by pressing "OFF" (
).
Reverts; "On-line" mode is
not activated.
\communication mode
NOTICE: 59
Switches to GeoCOM on-line
mode.
Do you want to switch?
PARAM YES NO
MC