Leica Geosystems TPS1100 Professional Series - User Manual - Manual (Page 81)

81
TPS1100 - User Manual 2.2.1en System functions
6
10
12
21
26
Coding, continued
Point coding with codelist
This function becomes active if a
point code list has been selected. In
the measurement dialog, the codelist
is displayed in the line "point code".
The list is opened with direct input or
with
.
Confirms the selection.
Creates a new point code.
Calls the latest point code.
Enters attribute values.
MEAS\ Measurement & Record
MEAS: TEST.CRF < >
Code
101 Tree
102 Bush
103 Latern
104 Hydrant
CONT NEW LAST ATRIB α αα αα NUM
MC
QUIT
This function enables a
measurement block and a code block
for a predefined code to be stored by
pressing a key (Quick-Coding). Up to
100 codes defined in the codelist can
be called with the numerical keys in
this manner (default 10 codes).
The quick coding can be switched on
and off with "QCod+ / QCod-". When
quick coding is active, the symbol "C"
is displayed in the bottom of the
graphical status field of the
measurement display. When the
quick-coding option is switched off,
this symbol disappears.
Quick Coding (QCod+ / QCod-)
Switches between numeric
and alphanumeric input for a
rapid search for codes.