Leica Geosystems TPS1100 Professional Series - User Manual - Manual (Page 103)

103
TPS1100 - User Manual 2.2.1en System parameters
6
10
12
21
26
45
V-Display
Selects the V-angle display
• Zenith angle
V = 0 in zenith
• Elev. angle
V = 0 in horizontal (elevation
angle)
V-angles are positive above the
horizon and negative below it.
• Elev. angle %
V = 0 in horizontal
V-angles are expressed in % and
are positive above the horizon and
negative below it.
Power mode
Sets automatic switchoff criteria.
These become effective after the set
time has elapsed, provided that the
keyboard and interface have not
been used meanwhile.
Selects the switch-off option
• Sleep after ...
Goes into sleep mode after the
number of minutes set. In this
energy-saving mode the power
consumption is reduced by about
60%. Active functions and
applications can be resumed after
waking.
• Auto off after ...
The instrument switches off
automatically after the number of
minutes set.
• Remains on
The instrument remains
permanently switched on.
Configuration parameters, continued
Power Time
Selects switchoff time in minutes:
Enters the time after which the
instrument is to go into power-saving
mode or to switch off.
Dist. Delay
Enters how long the display should
appear during the distance
measurement (values between 0 and
3 seconds are possible).