Leica Geosystems TPS1100 Professional Series - User Manual - Manual (Page 129)

129
TPS1100 - User Manual 2.2.1en Safety directions
6
10
12
21
26
45
84
92
Integrated distancer (visible laser)
As an alternative to the infrared
beam, the EDM incorporated into the
total station produces a visible red
laser beam which emerges from the
telescope objective. WARNING:
Two types of distancers with
visible laser are available:
• Total stations with distancers of
laser class 3R resp. IIIa -
identifiable by:
• the type plate in the battery
compartment with note to
"+Reflectorless Ext. Range",
• a laser emission indicator lamp
on the eyepiece side of the
telescope cover,
• a warning label below the
memory card compartment: "La-
ser class 3R" and "Class IIIa
LASER PRODUCT".
• Total stations with distancers of
laser class 2 resp. II - identifiable
by:
• the type plate in the battery
compartment without note to
"+Reflectorless Ext. Range",
• a warning label below the
memory card compartment: "La-
ser class 2" and "Class II LA-
SER PRODUCT".
Products with an integrated
distancer of laser class 3R resp.
IIIa
The product is a Class 3R laser
product in accordance with:
• IEC 60825-1:1993 + A1:1997 +
A2:2001 : "Radiation safety of
laser products"
The product is a Class IIIa laser
product in accordance with:
• FDA 21CFR Ch.I §1040 : 1988
(US Department of Health and
Human Service, Code of Federal
Regulations).
Class 3R / IIIa laser products:
Direct intrabeam viewing is always
hazardous. Avoid direct eye exposure.
The accessible emission limit is
within five times the accessible
emission limits of Class 2 / II in the
wavelength range from 400nm to
700nm.