Electromagnetic compatibility, continued – Leica Geosystems TPS1100 Professional Series - User Manual User Manual
Page 141

141
TPS1100 - User Manual 2.2.1en
Safety directions
6
10
12
21
26
45
84
92
CAUTION:
Disturbances caused by
electromagnetic radiation can
result in the tolerance limits for
measurements being exceeded.
Although the total stations meet the
strict regulations and standards
which are in force in this connection,
Leica Geosystems cannot completely
exclude the possibility that the total
station may be disturbed by very
intense electromagnetic radiation,
e.g. near radio transmitters, walkie-
talkies, diesel generators, power
cables.
Check the plausibility of results
obtained under these conditions.
Electromagnetic Compatibility, continued
WARNING:
If the total station is operated
with connecting cables
attached at only one of their two ends
(e.g. external supply cables, interface
cables), the permitted level of
electromagnetic radiation may be
exceeded and the correct functioning
of other instruments may be
impaired.
Precautions:
While the total station is in use,
connecting cables (e.g. instrument to
external battery, instrument to
computer) must be connected at both
ends.