Leica Geosystems TPS1100 Professional Series - User Manual - Manual (Page 62)

62 System functions TPS1100 - User Manual 2.2.1en
GSI-parameters
WI-No. Parameters Description
-- \empty Empty line
-- Displ.Mask Current display mask
(*) 58 Add.const. Prism constant
-- Backs. Id Current backsight Id
(*) 72
(*) 73
(*) 74
(*) 75
(*) 76
(*) 77
(*) 78
(*) 79 Attrib. 1
Attrib. 2
Attrib. 3
Attrib. 4
Attrib. 5
Attrib. 6
Attrib. 7
Attrib. 8
Attributes (1-8) can be used to store additional information in the field. Each of the editable parameters can contain up
to 8 or 16 alphanumeric characters.
Contrary to CODE-words, Point codes and Attributes are stored within the measurement data block, as long as the
record mask contains attributes.
-- AVG n max. Maximum number of distance measurements in the averaging mode
41 Code Code blocks serve to record additional information used in further processing of the measurement data. The codes are
stored in blocks separate from the measurement data blocks and contain at least one CODE-word and up to87 more
information words (Info 1 to 8).
-- Code Mngmt Codelist managment: view, select, create, edit
-- Code Descr Description for the current code
-- Codelist View and select Codelist
-- Data job View and select Data-Job
-- Date Current date
-- DJob Mngmt Data-Job management: view, select, create, edit
Complete list of display and recording parameters
(*) = only on the record screen