Leica Geosystems TPS1100 Professional Series - User Manual - Manual (Page 64)

64 System functions TPS1100 - User Manual 2.2.1en
GSI-parameters, continued
WI-Nr. Parameters Description
(*) 81 East East coordinate of traget point
-- ppm atm. Atmospheric ppm value
-- ppm geom. Geometric ppm value
(*) 59 ppm total Total ppm-correction
(*) 51 ppm/mm Total ppm-correction and prism constant
-- PtC.Descr. Description for the current Code
(*) 71 Point Code Current Point Code
(*) 11 Point Id Current Point Id (either the running or the individual point id)
(*) 87 Refl. Ht. Reflector height
-- Refl. list View and select a reflector
-- Refl.Name Display the current reflector name
-- Displ.Mask View and select the recording mask
(*) 31 Slope Dist Measured slope distance (already corrected using ppm and prism constant)
-- Station Id Station point number
(*) 86 Stn.Elev. Station Elevation (Zo)
(*) 85 Stn.North Station northing coordinate (Xo)
(*) 84 Stn.East Station easting coordinate (Yo)
(*) 22 V Vertical angle
-- V-Display View and select the V angle display
-- Last PtId Display of the last recorded Point Id
-- Prev.Code Display of the last recorded Code
-- Prev.PtCod Display of the last recorded Point Code
-- Time Current system-time
-- Target Typ Current target type, reflector or none