Leica Geosystems TPS1100 Professional Series - User Manual - Manual (Page 128)

128
TPS1100 - User Manual 2.2.1en Safety directions
6
Integrated distancer (infrared laser)
The EDM module built into the total
stations produces an invisible infra-
red beam which emerges coaxially
from the telescope objective.
The product is a Class 1 laser
product in accordance with:
• IEC 60825-1:1993 "Radiation
safety of laser products"
• EN 60825-1:1994 + A11:1996
"Radiation safety of laser
products"
The product is a Class I laser product
in accordance with:
• FDA 21CFR Ch.I §1040: 1988 (US
Department of Health and Human
Service, Code of Federal
Regulations)
Class 1/I laser products are safe
under reasonably foreseeable
conditions of operation and are not
harmful to the eyes provided that the
products are used and maintained in
accordance with the instructions.
Exit for
infrared beam
(invisible)
1100Z33
1100Z38
Type: TC..... Art.No.: ......
Power: 12V/6V ---, 1A max
Leica Geosystems AG
CH-9435 Heerbrugg
Manufactured:1998
Made in Switzerland S.No.: ......
This laser product complies with 21CFR 1040
as applicable.
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause harm-
ful interference, and (2) this device must accept
any interference received, including inter-
ference that may cause undesired operation.
Beam divergence: 1.8 mrad
Pulse duration: 800 ps
Maximum radiant power: 0.33 mW
Maximum radiant power
per pulse:
4.12 mW
Measurement uncertainty: ± 5%
Class 1 Laser Product
according to IEC 60825-1:1993