Leica Geosystems TPS1100 Professional Series - User Manual - Manual (Page 106)

106 System parameters TPS1100 - User Manual 2.2.1en
6
0
2
21
26
45
Increment
Incrementation of point numbers
Numeric and alphanumeric
components of the running point
number can be incremented
individually, enabling the
incrementation to be defined as a
numerical template.
For example, the running point
number 12A2001 is incremented by
102001 after the point number
12B22002 has been stored, and then
again for the point number
12C23003, and so on.
Letters can be from A - z
(ASCII 065 - 122). In this
connection it is not possible to
transfer numbers to letters and vice-
versa and within the alphanumeric
range.
Measurement parameters, continued
Examples:
Confirms the warning and the
change in the point number
or in the increment.
MEAS\ measurement & Record
WARNING: 152
Automatic incrementation of
Point Id failed.
-> Check Point Id and
Incrementation.
OK
MC
Pt.Id. 12z001 12A999 12Az100
Increment 1000 000001 1001000
Explanation no transfer of letters
to numbers
no transfer of
numbers to letters no transfer of letters