Leica Geosystems TPS1100 Professional Series - User Manual - Manual (Page 56)

56 System functions TPS1100 - User Manual 2.2.1en
Manual input of coordinates (INPUT)
This function enables point
coordinates to be entered and stored
in the current data file.
\ Enter coordinate set
Data Job : papillon.gsi
Enter min. : PointId+E+N
Indiv.PtId : 1
East : 0.000 m
North : 0.000 m
Elev. : 0.000 m
CONT REC
MC
QUIT
Transfers the displayed
values to the calling function.
Sets the point data and
stores them in the data file.
The height is stored only if a value
has been entered.
This function permits the conversion
of coordinates (P, E, N, (H)).
Three different file formats are
supported:
• GSI (Leica Geosystems standard
format) = *.GSI
• ASCII (normal ASCII text files) =
*.ASC
• TDS (Tripod Data Systems) =
*.CR5
Converting data
After the function has been called,
the dialog shown on the next page
appears, permitting rapid selection of
the original file and its format and
also input of the name of the target
file (output file) and its format.