CANOGA PERKINS 9145E NID Software Version 4.10 - Manual (Page 285)

Bandwidth Profiling 9145E NID Software User’s Manual
Configuring Bandwidth Profiles
273
13.5 Configuring Bandwidth Profiles
Use the following steps to navigate to the Bandwidth Profile screens.
1. On the Main Menu (Figure 2-3), type 13 and press Enter. The Bandwidth Profile
Enforcement screen (Figure 13-3) opens.
Figure 13-3 Bandwidth Profile Enforcement screen
13.5.1 Create a Bandwidth Profile
1. On the Bandwidth Profile Enforcement screen, type 1 and press Enter. The Bandwidth
Profiles List screen (Figure 13-4) opens.
2. To create a new profile, type A and press Enter. The Create a New Bandwidth Profile
Record (Figure 13-5) screen opens. The cursor is positioned in the Type field.
3. Press the Space bar to select Policer Profile or Shaper Profile and press Enter. The
cursor moves to the ID field.
4. Type an ID number from 1-4096 and press Enter. The cursor moves to the Name field.
5. Enter a name.
NOTE: See the section “Bandwidth Profiles” on page 267, for more information about these
fields.
6. In the CIR field, type a number between 0 and 1000000 and press Enter. CIR must be
multiple of 64Kbit/s, or 1Mbit/s. If CIR is zero, then CBS must also be zero and both EIR
and EBS must be non-zero.
7. In the CBS field, type a number between 10 and 254, or 0 and press Enter.
8. In the EIR field, type a number between 0 and 1000000 and press Enter. EIR must be
multiple of 64Kbit/s, or 1Mbit/s. If EIR is zero, then EBS must also be zero and both CIR
and CBS must be non-zero.
Canoga Perkins Corp. Ethernet 1G/10G Network Interface Device 29-AUG-2011
9145E-101-2-0 V04.10 07:55:07
------------------------- BANDWIDTH PROFILE ENFORCEMENT ------------------------
1) Bandwidth Profiles
2) User To Network Ingress Policers
3) User To Network Egress Shapers
4) Clock Rate Granularity: 1 Mbps
5) Color Marking Method: DEI
Yellow PCP Value: N/A
Select [1-5]:
------------------------------------Messages-----------------------------------