CANOGA PERKINS 9145E NID Software Version 4.10 - Manual (Page 129)

Diagnostics 9145E NID Software User’s Manual
Service Activation Testing
117
4.9.3 Service Activation Tests
To add, delete, or modify Service Activation tests, on the Service Activation screen (Figure 4-58),
type 3 and press Enter. The SA Test List screen (Figure 4-71) opens.
Figure 4-71 Service Activation Test List screen
1. To create an SA Test, type A and press Enter. The Create Service Activation Test screen
(Figure 4-72) opens.
2. Follow the prompts to create an SA Test. When you are finished, type A to accept and
press Enter.
Figure 4-72 Create Service Activation Test screen
3. To view details for an SA Test, on the SA Test List screen (Figure 4-71), type V and press
Enter. Press the Space bar to select a test. Note that if the port speed is less than the
Canoga Perkins Corp. Ethernet Network Interface Device 29-JAN-2009
9145E-761-0-0 V41.66 23:47:13
---------------------------- SA TEST LIST ---------------------Items 1 - 2 of 2-
ID Test Description SA Test
Profile State
1 T-1 SA-1 In progress
2 T-2 SA-2 Aborted
Select [(F)irst, (P)rev, (N)ext, (L)ast, (A)dd, (D)elete, De(T)ails]:
------------------------------------Messages----------------------------------
Canoga Perkins Corp. Ethernet Network Interface Device 29-JAN-2009
9145E-761-0-0 V41.66 23:47:13
------------------------ CREATE SERVICE ACTIVATION TEST ------------------------
Ingress port : User
1) SA Test ID : 1
2) Description : T-1
3) More Info : cbs test
4) SA Profile : SA-1
5) Ingress C-VID : 1
6) Ingress PCP : 3
7) Peer Mgmt IP : 10.10.1.4
8) Bandwidth profile : BW-1 (CIR=1000, CBS=80, EIR=2000, EBS=80)
Select [1-8]:
------------------------------------Messages----------------------------------