CANOGA PERKINS 9145E NID Software Version 4.10 - Manual (Page 251)

Service OAM 9145E NID Software User’s Manual
Maintenance Intermediate Points
239
If you are configuring a Y.1731 MIP, go to step 7.
Figure 11-36 Maintenance Intermediate Point Attributes screen (802.1ag)
7. For Y.1731, to change the AIS Transmit interval, type 2 and press Enter. Select 1 sec or 1
min and press Enter.
8. To change the AIS priority bits, type 3 and press Enter. Type a number from 0 to 7 and
press Enter.
9. Type A to accept the settings and press Enter. Press Esc to return to the Maintenance
Intermediate Point Attributes screen.
Canoga Perkins Corp. Ethernet Network Interface Device 02-JAN-2009
9145E-101-1-0 V04.10 05:15:27
------------------MAINTENANCE INTERMEDIATE POINT ATTRIBUTES---------------------
MIP ID: 1 Type: 802.1ag Level: 0
MD ID: 2 Port: User MAC: 00:40:2A:01:EE:23
1) Admin status: Enabled
2) To see VLAN list.
Select [1-2] for attributes:
------------------------------------Messages-----------------------------------