CANOGA PERKINS 9145E NID Software Version 4.10 - Manual (Page 265)

Configuring EVC 9145E NID Software User’s Manual
EVC Configuration
253
12.2 EVC Configuration
NOTE: EVC Configuration Records options replace the VLAN multiplexing configuration of pre-
vious versions of the 9145.
This screen represents the main entry point into the forwarding configuration. When the
configuration mode is EVC unaware, the EVC configuration records are not accessible, and the
configuration is done through the VLAN configuration screens under “Port Configuration”.
Use the following steps to navigate to the EVC configuration records. The Record List is the main
entry point to EVC configuration and Statistics monitoring. It displays all EVC records in the
system. Each EVC record is uniquely identified by the S-VLAN ID.
1. On the Main Menu (Figure 2-3), type 12 and press Enter. The EVC Configuration screen
(Figure 12-2) opens. The default value for attribute 1 is “EVC unaware”
Figure 12-2 EVC Configuration screen (EVC Unaware)
Canoga Perkins Corp. Ethernet 1G/10G Network Interface Device 29-AUG-2011
9145E-101-2-0 V04.10 06:07:50
------------------------------- EVC CONFIGURATION ------------------------------
Configuration mode: EVC unaware
1) System TPID Configuration
Select [1]:
------------------------------------Messages-----------------------------------