CANOGA PERKINS 9145E NID Software Version 4.10 - Manual (Page 242)

9145E NID Software User’s Manual Service OAM
Maintenance End Points
230
4. To set the Initial TTL (time to live) value for the LTM, type 3 and press Enter. Enter a
value between 2-255. The TTL value indicates the number of nodes (SOAM-enabled L2
forwarding devices) the LTM will cross before it is dropped. The default value is 64. If the
LTM TTL is 0 or 1, the LTM is not forwarded to the next node, and if 0, no LTR is
generated.
5. Press Esc to return to the Maintenance End Point Attributes screen.
6. To send the linktrace request, type S and press Enter.
Figure 11-26 Linktrace Request screen
11.6.6.2 Monitoring a Linktrace Request
1. To see results details, on the Linktrace Monitoring screen (Figure 11-27), type S and
press Enter. The SOAM Linktrace Report screen (Figure 11-28) opens. Press Esc to
return to the Linktrace Monitoring screen.
2. To send another Linktrace Request, type R and press Enter. The Linktrace Request
screen (3.) opens.
3. Press Esc to return to Maintenance End Point attributes screen.
Canoga Perkins Corp. Ethernet Network Interface Device 02-JAN-2009
9145E-101-1-0 V04.10 05:15:27
------------------------------LINKTRACE REQUEST--------------------------------
MEP ID: 100
1) Destination: MEP ID : 200
2) FDB only flag: No
3) Initial TTL value: 64
Select [1-4] for attributes, (S) to send:
------------------------------------Messages-----------------------------------