CANOGA PERKINS 9145E NID Software Version 4.10 - Manual (Page 269)

Configuring EVC 9145E NID Software User’s Manual
EVC Configuration
257
10. To modify the assigned policer profile, or allocate new policers to EVC or EVC/COS, type
9 and press Enter. The VLAN/COS Policing screen (Figure 12-6) opens. Note that if the
EVC belongs to a User Port for which policing is enable at the port level, this screen is
read only and displays the port-level policer information.
• To set a policing level, type 1 and press Enter. Press the Space bar to select
None, EVC or PCP, and press Enter.
• To assign a policer ID, type a number between 1 and 4096, and press Enter.
• To assign a bandwidth profile, type 3 and press Enter. Press the Space bar to
select a profile and press Enter.
• Press Esc to return to the Modify EVC Configuration Record screen.
Figure 12-6 VLAN/COS Policing screen
11. To view or modify C-VLAN translation, type 10 and press Enter. The C-VLAN ID
Translation Table screen (Figure 12-7) opens. This screen allows you to specify CE-VID
translation rules for CE-VLANs that are part of an EVC.
NOTE: This screen is not accessible if the T-Tag is enabled for any EVC. By default, each C-
VLAN is mapped to itself (that is, there is no translation) and such default translation is not dis-
played. If T-Tag is enabled for an EVC, all the C-VID translation configuration will be reset to
default.
• To add a C-VLAN, C-VLAN ID Translation Table screen, type 1 and press Enter.
You are prompted to type a number from 1-4094, and press Enter. Enter the
ingress C-VLAN ID that you wish to be subject to the C-VLAN ID translation, fol-
lowed by the corresponding translated C-VLAN ID. Because the translated C-
VLAN IDs are used for the service multiplexing, they have to be included in the
Canoga Perkins Corp. Ethernet 1G/10G Network Interface Device 29-AUG-2011
9145E-101-3-0 V04.10 14:09:42
----------------------------- VLAN/COS POLICING --------------------------------
EVC ID: 1
(# of CE-VLAN 1): PTag
1) Policing Level: None
2) Policer ID: N/A
3) Bandwidth Profile: N/A
Select [1-3]:
------------------------------------Messages-----------------------------------