BendixKing KSN 770 - Pilots Guide - Manual (Page 57)

KSN 765/770 Integrated Communication Navigation Display
D200802000009
REV 2 Jun 2014 3-1
Display States and Mode Control
Honeywell International Inc. Do not copy without express permission of Honeywell.
3. Display States and Mode
Control
INTRODUCTION
This section describes the display states and the modes to control the
interactive display of the KSN 765/770.
PAGE LAYOUT
The MFD function and FMS function are segmented into three
predefined layouts that the pilot can select from. Layouts are changed
by pushing the PAGE bezel key .
Pushing the PAGE bezel key toggles through the three predefined
page layouts in the following order:
D
Pg 1/3  Pg 2/3  Pg 3/3  Repeat
NOTE: The previously selected layout is displayed after a power
cycle of the unit.
The MFD function and FMS function have different predefined layouts.
The following paragraphs describe the MFD and FMS layouts.
MFD Layouts
The MFD layouts are displayed by pushing the MFD bezel key . When
a MFD layout is displayed, pushing the PAGE bezel key toggles through
the following pages.
D
Full Screen Layout  Split Screen Layout  Thumbnail
Layout  Repeat
NOTE: The previously selected layout is displayed after a power
cycle of the unit or when leaving the MFD function and return
to it.