BendixKing KSN 770 - Pilots Guide - Manual (Page 108)

KSN 765/770 Integrated Communication Navigation Display
D200802000009
REV 2 Jun 2014
Navigation Map View
6-10
Honeywell International Inc. Do not copy without express permission of Honeywell.
Range Selection
Range selection is depicted as an outer range ring arc or circle with the
corresponding numerical value displayed in the lower--left corner. The
zoom- in/+ and zoom- out/- bezel keys , shown in Figure 6--5, are
used to select the range . When panning is active, range can also be
controlled by rotating the joystick knob.
Figure 6--5
Range Selection
When auto--range is not active, the navigation map view scale is
selected by the pilot such that the outer radius of the primary range ring
represents 0.5 , 1 , 2 , 3 , 5 , 10 , 15 , 20 , 30 , 40 , 60 ,
80 , 100 , 200 , 500 , 1000 , and 2000 nautical miles (NM) from
the current aircraft position.
NOTE: Range settings are retained following a power cycle of the
unit.
AUTO--RANGE
The auto--range feature automatically scales the range (to the closest
range setting) to two times the distance between the ownship and the
active waypoint. The auto--range feature is selected on the menu using
the NAV MAP AUTO RNG option, described in Section 4, Menu.