BendixKing KSN 770 - Pilots Guide - Manual (Page 311)

KSN 765/770 Integrated Communication Navigation Display
D200802000009
REV 2 Jun 2014
Flight Management System (FMS)
15-38
Honeywell International Inc. Do not copy without express permission of Honeywell.
LOADING AN APPROACH
CAUTION
BEFORE STARTING AN APPROACH TRANSITION OR
APPROACH, THE PILOT MUST REVIEW THE PUBLISHED
ARRIVAL PROCEDURE AND VERIFY THE FMS WAYPOINTS
AND ALTITUDE RESTRICTIONS.
The PROC bezel softkey label is displayed when the FMS waypoint
list window has focus or when the HOME window has focus on page
1/3 of the FMS bezel softkey labels (described later in this section).
When the FMS waypoint list has focus, an airport (or runway) must be
highlighted in the waypoint list window to display selectable arrival and
approach prompts. Otherwise, the ARR and APPR bezel softkey
labels are not displayed. When the HOME window has focus, pushing
the PROC bezel softkey label always displays selectable ARR and
APPR prompts for the displayed destination airport.
Activating the PROC bezel softkey label changes the bezel softkey
labels to display available procedures: departure ( DEP ), arrival
( ARR ), approach ( APPR ), and channel ( CH # ), as shown in
Figure 15--33.
Figure 15--33
Entering an Approach