Flight segments – BendixKing KSN 770 - Pilots Guide User Manual
Page 358

KSN 765/770 Integrated Communication Navigation Display
D200802000009
REV 2 Jun 2014
15-85
Flight Management System (FMS)
Honeywell International Inc. Do not copy without express permission of Honeywell.
Flight Segments
The following flight segments provide a visual break in the waypoint list
for the pilot and make it more obvious where the different phases of
flight begin.
Current Segment -- When LNAV is
captured, the current segment of the
flight plan is indicated with a magenta
arrow, which shows the From
waypoint and the TO waypoint. Also,
the TO waypoint and active leg are
displayed in magenta on the map
display. LNAV is considered captured
when the FMS is providing valid guidance to intercept the active leg or
guidance along the active leg.
When LNAV is not captured, the
current segment of the flight plan is
indicated with a green arrow that
shows the From waypoint and the To
waypoint. Also, the TO waypoint and
active leg are displayed in green on
the map display.
If the GPS position is invalid, the
current segment of the flight plan is
indicated with a white arrow. All legs and waypoints on the map display
are shown in white.
Missed
Approach
--
The
Missed Approach
header in the
waypoint list window is used to
separate the flight plan from the
missed approach procedure.
Flight Plan Procedure Banner --
Loaded procedures in the flight plan
are displayed in green text prior to the
first waypoint of the procedure in the
flight plan list.
When an LPV or LP approach is
selected, the reference path identifier
is displayed before the airport name.